Division 9 Ebook Page 8 Resist Acoustical Panels

Resist Acoustical Panels PROJECT ARCHITECT RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment. This guide is to aid in the creation of a complete building specification that is to be fully reviewed and edited by the architect of record (specifier). Sections of this guide should be included, edited, or omitted based on the requirements of a specific project. It is the responsibility of both the specifier and the purchaser to determine if a product or system is suitable for its intended use. Neither Owens Corning, nor any of its subsidiary or affiliated companies, assume any responsibility for the content of this specification guide relative to actual projects and specifically disclaim any and all liability for any errors or omissions in design, detail, structural capability, attachment details, shop drawings or other construction related details, whether based upon the information provided by Owens Corning or otherwise. SECTION 098410 - SOUND ABSORPTIVE WALL PANELS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: Sound absorptive wall panels. B. Related Work: The following items are not included in this Section and are specified under the designated Sections: 1. Section 092100 - PLASTER AND GYPSUM BOARD ASSEMBLIES for plaster and gypsum board walls and ceilings. 1.2 SUBMITTALS A. Product Data: Submit manufacturer's product data including certified laboratory test reports and other data required to show compliance with these specifications. B. Samples: Submit 11-1/2 by 11-1/2 inch samples of representative panel with factory detailed edge, and representative samples of mounting devices. 1.3 QUALITY ASSURANCE A. Pre-installation Conference: Conduct conference at Project site to comply with requirements in Division 01. 1.4 DELIVERY, STORAGE, AND HANDLING A. Project Conditions: Protect system components from excessive moisture in shipment, storage, and handling. Deliver in unopened bundles and store in a dry place with adequate air circulation. Do not deliver material to building until wet conditions such as concrete, plaster, paint, and adhesives have been completed and cured to a condition of equilibrium. 1.5 LIMITED WARRANTY A. Limited Warranty: Provide manufacturer's standard limited 3-year warranty against manufacturing defects in material or workmanship. PART 2 - PRODUCTS 2.1 SOUND ABSORPTIVE WALL PANELS A. Basis-of-Design: Conwed Designscape Wall Technology Resist Acoustical Panels. 1. Construction: Composite core of dimensionally stable rigid fiberglass.

Previous Page
Next Page