Division 9 Ebook Page 79 Foundations Acoustical Ceiling Panels

Product Data Sheet FOUNDATIONS CEILING PANELS APPLICATION Conwed Designscape Wall Technology Foundations Acoustical Ceilings are designed for areas requiring excellent acoustical absorption with a 'soft drywall' look. Use in conference rooms, auditoriums, churches, entry-ways, and similar areas. Panels are paintable up to 3 times (spray application) without losing acoustical absorption**! CONSTRUCTION The core construction is a dimensionally stable 6-7 PCF glass fiberboard laminated with a 1 /8" 16-20 pcf molded glass fiber, all covered with a specially formulated fiberglass mat. Edges are protected with resin hardening. The acoustically transparent finish completely covers the face and exposed edges. SIZE AVAILABILITY Available thicknesses are 1", 1-", 2", plus the 1 /8" molded glass fiberboard. Maximum sizes is 4'x10'. EDGE DETAIL All edges are resin hardened, unless otherwise specified. Available shapes include: square and bevel. For square-edged abutting panels, a kerf and spline is strongly recommended for accurate face alignment. Another fine option is to introduce a small reveal between panels. FINISH Foundations Acoustical Ceilings come factory-finished with a proprietary white, acoustically transparent and if desired, paintable covering. MOUNTING Standard ceiling mountings include lay-in, resin spots, or Z-bar to Z-bar. ACOUSTICAL PERFORMANCE Foundations Acoustical Ceilings provide excellent acoustical performance for auditoriums, theaters, offices, libraries, classrooms and virtually anywhere sound absorption is required. Thickness NRC 1- 1 /8" .85 2- 1 /8" .90 The noise reduction coefficients were derived from tests conducted according to ASTM C 423 on a Type E400 mounting by a NVLAP accredited laboratory. Note: Testing with 4 layers of paint showed an NRC of .80 for a 1- 1 /16" product, so reduction was minimal! FIRE PERFORMANCE Each component has been tested according to ASTM E 84 * and has Class I/A rating. RECYCLED CONTENT Foundations Acoustical Ceilings can utilize an Owens Corning fiberglass board core that is third-party certified for recycled content. The board is certified by SCS to contain at least 57% recycled glass. And for your LEED project, our acoustical panels can help you qualify for recycled content points under the Materials and Resources section. Other LEED categories may also apply depending upon the project requirements. WARRANTY 3-YEAR WARRANTY Foundations Acoustical Ceilings have a limited 3-year warranty. The panels are warranted to be free from defects in material and workmanship for a period of three years from the date of purchase. See product warranty for details and limitations. * The ASTM E 84 standard should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment, which takes into, account all of the factors, which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating. *See field painting instructions.

Previous Page
Next Page