Division 9 Ebook Page 73 RespondŽ IR Series Acoustical Panels

Product Data Sheet RESPOND IR SERIES IR108/IR308/IR408 APPLICATION Conwed Designscape Wall Technology Respond IR Series (IR108/IR308/IR408) panels are designed for high traffic areas requiring impact-resistant tackable surfaces with excellent acoustical absorption. Use in corridors, lobbies, hallways and similar areas. CONSTRUCTION The core construction is a dimensionally stable 6-7 pcf glass fiberboard with resin hardened edge protection laminated with a 1 /8" 16-20 pcf molded glass fiber. Finishes are completely adhered to the face of the panel and returned to the back for a full finished edge. All corners are fully tailored. SIZE AVAILABILITY Available in ", ", 1", 1-" 2", 3" and 4" thicknesses, plus 1 /8" molded glass fiberboard. Maximum sizes for 1", 2", 3" are either 4'x12' or 5'x10'. 4" maximum is 4' x 6' or 24 square feet. Custom sizes are standard! EDGE DETAIL All edges are resin hardened, unless otherwise specified. Available choices include: square, radius, bevel, and radius corners. FINISH A wide variety of fabrics are available from all major brands, including Guilford, Maharam, Knoll, Carnegie, and Designtex. A comprehensive selection of vinyl coverings is available from Santas Kalahari, Designtex and Maharam. MOUNTING Standard mountings include spot and perimeter adhesive, Z-clip, concealed splines, impaling clips, hook & loop, and magnetic fasteners. Z-Bar to Z-Bar is recommended for ceilings. ACOUSTICAL PERFORMANCE Our products are constantly modified to achieve their maximum acoustical performance while providing the aesthetics desired in their applications. Panels are available in a variety of thickness, and their performances are tested in accordance to ASTM procedures in a NVLAP accredited laboratory. Please consult with your Local Representative, or the Company's Technical Services Department for assistance in determining the proper panels, and their acoustical specifications, for your application. FIRE PERFORMANCE Each component has been tested according to ASTM E 84* and has a Class I/A rating. R-VALUE The R-Value is resistivity to heat or cold, and is an important factor in choosing a finish. 1" 4.1 1- 1 / 2 " 6.2 2" 8.3 3" 12.5 4" 16.6 RECYCLED CONTENT Respond IR Series panels can utilize an Owens Corning fiberglass board core that is third-party certified for recycled content. The board is certified by SCS to contain at least 57% recycled glass. And for your LEED project, our acoustical panels can help you qualify for recycled content points under the Materials and Resources section. Other LEED categories may also apply depending upon the project requirements. WARRANTY 3-YEAR WARRANTY Respond IR108 Series Acoustical Panels have a limited 3-year warranty starting from date of shipment. The panels are warranted to be free from defects in material and workmanship. See product warranty for details and limitations. * The ASTM E 84 standard should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment, which takes into, account all of the factors, which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating.

Previous Page
Next Page