Division 9 Ebook Page 69 Resist Acoustical Panels

Product Data Sheet RESIST PANELS APPLICATION Conwed Designscape Wall Technology Resist Acoustical Wall Panels are designed for gymnasiums and multi-purpose areas. The resilient fiberglass core springs back on impact to resist permanent deformation. This is an economical approach to sound absorption and abuse resistance. CONSTRUCTION The core construction is a dimensionally stable 6 PCF resilient fiberglass board with optional resin hardened edge protection. Classic construction: unhardened edges combined with a non- woven ribbed polyester fabric wrap. Finishes are completely adhered to the face of the panel and returned to the back for a full finished edge. All corners are fully tailored. SIZE AVAILABILITY Available thicknesses are 1- 1 /8" and 2- 1 /8". Widths are up to 48", and lengths to 10'. Sizes up to 60" x 120" are available in some non-classic fabrics. EDGE DETAIL In the classic construction with Whispertex fabric, edges are unhardened; however resin hardened edges are available in other fabrics. Available choices include: square, radius, bevel, half bevel, and radius corners. FINISH Classic Resist finish is Whispertex Plisse, a ribbed non-woven fabric (shown). Other finishes of choice include Whispertex Coppersmith, which is not ribbed, and Guilford 2100. MOUNTING Standard mountings include spot and perimeter adhesive, Z-clip, concealed splines, impaling clips, hook & loop, and magnetic fasteners. Z-Bar to Z-Bar is recommended for ceilings. ACOUSTICAL PERFORMANCE Resist Acoustical Wall Panels provide excellent acoustical performance for gymnasiums and multi-purpose areas, and virtually anywhere sound absorption is required. FIRE PERFORMANCE Each component has been tested according to ASTM E 84* and has a Class I/A rating . WARRANTY 3-YEAR WARRANTY Resist Acoustical panels have a limited 3-year warranty starting from date of purchase. The panels are warranted to be free from defects in material and workmanship. See product warranty for details and limitations. * The ASTM E 84 standard should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment, which takes into, account all of the factors, which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating.

Previous Page
Next Page