Division 9 Ebook Page 63 QuietZoneŽ Acoustic Batts with PureFiberŽ Technology

QuietZone Acoustic Batts with PureFiber Technology PROJECT ARCHITECT RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment. This guide is to aid in the creation of a complete building specification that is to be fully reviewed and edited by the architect of record (specifier). Sections of this guide should be included, edited, or omitted based on the requirements of a specific project. It is the responsibility of both the specifier and the purchaser to determine if a product or system is suitable for its intended use. Neither Owens Corning, nor any of its subsid- iary or affiliated companies, assume any responsibility for the content of this specification guide relative to actual projects and spe- cifically disclaim any and all liability for any errors or omissions in design, detail, structural capability, attachment details, shop draw- ings or other construction related details, whether based upon the information provided by Owens Corning or otherwise. SECTION 098117 - ACOUSTIC BATT INSULATION PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: Glass fiber acoustical insulation for wood-framed interior walls, floor and ceilings. (Owens Corning QuietZone Acoustic Batts with PureFiber Technology) B. Related Work: The following items are not included in this Section and are specified under the designated Sections: 1. Section 061000 - ROUGH CARPENTRY for acoustic wood framing. 2. Section 092100 - PLASTER AND GYPSUM BOARD ASSEMBLIES for plaster and gypsum board walls and ceilings. 1.2 SUBMITTALS A. Product Data: Submit manufacturer's product specifications including certified laboratory test reports and other data required to show compliance with these specifications. 1.3 DELIVERY, STORAGE, AND HANDLING A. Project Conditions: Protect system components from excessive moisture in shipment, storage, and handling. Deliver in unopened bundles and store in a dry place with adequate air circulation. 1.4 WARRANTY A. Warranty: Provide manufacturer's standard 1-year warranty against defects in materials or manufacturing. PART 2 - PRODUCTS 2.1 MANUFACTURER A. Glass Fiber Acoustical Insulation for Wood Framed Interior Walls, Floors and Ceilings: QuietZone Acoustic Batts with PureFiber Technology as manufactured by Owens Corning, www.owenscorning.com with the following characteristics: 1. Type: Inorganic glass fibers complying with ASTM C 665, Type II, Class C. 2. Faced Batts: 3-/12 inches thick by 15 inches wide, 3-1/2 inches thick by 23 inches wide, and 5-1/2 inches thick by 15-1/2 inches wide as applicable to framing spacing; standard precut lengths. 3. Unfaced Batts: 3-1/2 inches thick by 15-1/4 inches and 3-1/2 inches thick by 23-1/4 inches wide as applicable to framing spacing, standard precut lengths. 4. Dimensional Stability: Less than 0.1 percent linear shrinkage. 5. Water Absorption: Less than 0.05 percent maximum by volume. 6. Code Compliance: a. Uniform Building Code (ICBO) building types III, IV and V. b. National Building Code (BOCA) building types 3, 4, and 5. c. Standard Building Code (SBCCI) building types III, V, and VI.

Previous Page
Next Page