Division 9 Ebook Page 120 RespondŽ Diffusers

Installation Instructions RESPOND DIFFUSER The following are guidelines given in good faith to help avoid common errors. They are not intended to be a step-by-step list of instructions or a checklist, and it is assumed the installer has general construction knowledge. Conwed Designscape Wall Technology bears no responsibility for any installation actions taken or not taken, and is not responsible for installer selection. INSPECTION Freight Damage: Inspect cartons for obvious damage before accepting and note on delivery ticket. Concealed Damage: Notify us of any concealed damage within 5 business days of receipt. Claims beyond 5 days will be honored at the discretion of Conwed Designscape Wall Technology or the freight company. Do not install products of unacceptable quality. Contact your area sales representative immediately. We will not be responsible for installation or removal costs of unacceptable product. WALL MOUNTED BARREL AND PYRAMIDAL DIFFUSERS 1. Using the 6" L-Clips as a template, drill 1 /8" pop-rivet holes in the front, top lip of the diffuser. Holes should be drilled from the gel coat side and located so the face of the clip is flush with the 'lip' of the diffuser. 2. Drill 1 /8" pop-rivet holes for hook & loop bracket in similar manner. (Diagrams show locations.) 3. Install L-Clips at top of diffuser and hook & Loop brackets at bottom of diffuser with white-headed pop-rivets. Insert pop-rivet from gel coat side. 4. Mount 6" wall bar to wall using appropriate fasteners to secure to wall structure. Top of wall bar should be located 1 /8" below desired height of diffuser. Be sure to allow a 1" minimum clearance above top of wall bar to engage L-Clip on wall bar. 5. Peel off white back of hook & Loop to expose adhesive and insert L-Clips onto wall brackets. With L-Clips fully engaged, level and adjust position. Press bottom of diffuser to wall to adhere hook & loop bracket. DIFFUSER INSTALLATION Small Diffuser Parts List, up to 48" x 48" 2 - 6" Wall Bars 2 - 6" L-Clips 1 - 6" Hook & Loop Bracket Locate and install as shown: L-Clips Hook & Loop

Previous Page
Next Page