Division 9 Ebook Page 119 RespondŽ Baffles

Installation Instructions RESPOND BAFFLES &'& &25325$7,21 800 Gustafson Road Ladysmith, Wisconsin 54848 T: 1-800-932-2383 F: 1-800-833-4798 www.conweddesignscape.com Pub. No. 10000551-B. Printed in U.S.A. April 2014. 2014 Owens Corning. All Rights Reserved. LEED is a registered trademark of U.S. Green Building Council. The following are guidelines given in good faith to help avoid common errors. They are not intended to be a step-by-step list of instructions or a checklist, and it is assumed the installer has general construction knowledge. Conwed Designscape Wall Technology bears no responsibility for any installation actions taken or not taken, and is not responsible for installer selection. INSPECTION Freight Damage: Inspect cartons for obvious damage before accepting and note on delivery ticket. Concealed Damage: Notify C onwed Designscape Wall Technology of any concealed damage within 5 business days of receipt. Claims beyond 5 days will be honored at the discretion of Conwed Designscape Wall Technology or the freight company. Do not install panels of unacceptable quality. Contact your area representative immediately. Conwed Designscape Wall Technology will not be responsible for installation or removal costs of unacceptable panels. HANDLING AND STORAGE Handle individual panels 'on edge' to avoid bending when moving and carrying. Store panels on a flat, dry, solid surface. Do not store on edge. Take necessary measures to keep panels dry, clean and free from dust. Pay special attention to edges. INSTALLING THE BAFFLES 1. Review the materials list supplied by Conwed Designscape Wall Technology (Plant Order) and any drawings. Carefully determine the starting position of the first baffle. 2. Suspend baffles vertically to either eyehooks or D-Rings as supplied. Standard placement is 6" from each edge, and approximately every 24" in the field with a maximum spacing of 30" on 72" wide panels (3 eyehooks or D-Rings). 3. Ganging baffles together is usually done using continuous Velcro strips (supplied by Conwed Designscape Wall Technology) on vertical edges; this also seals out light penetration between baffles. 4. In a similar manner, Velcro attached to the bottom of the baffle can be used for attachment to office dividers or similar situations. Note: We strongly recommend that baffles not be ganged vertically. Th f ll d l h h l d d f

Previous Page
Next Page