Division 7 Ebook Page 521 FOAMULARŪ XPS Insulation SI & I-P Units for Selected Properties

Technical Bulletin FOAMULAR Extruded Polystyrene (XPS) Insulation SI and I-P Units for Selected Properties This bulletin provides thermal conductivity, thermal resistance, density and compressive strength for FOAMULAR 150, 250, 400, 600 and 1000 insulation in thicknesses of 2", 3" and 4". SI units are provided in the tables, followed by I-P units in parenthesis. FOAMULAR 150 Insulation Thickness, mm Thermal Conductivity, W/mK, max. Thermal Resistance, m 2 K/W, min. Density, kg/m 3 , min. Compressive Strength, kPa, min. 100 (4") 0.029 (k=0.20) 3.53 (R-20) 20.8 (1.3 pcf) 103 (15 psi) 75 (3") 0.029 (k=0.20) 2.65 (R-15) 20.8 (1.3 pcf) 103 (15 psi) 50 (2") 0.029 (k=0.20) 1.77 (R-10) 20.8 (1.3 pcf) 103 (15 psi) FOAMULAR 250 Insulation Thickness, mm Thermal Conductivity, W/mK, max. Thermal Resistance, m 2 K/W, min. Density, kg/m 3 , min. Compressive Strength, kPa, min. 100 (4") 0.029 (k=0.20) 3.53 (R-20) 24.8 (1.55 pcf) 172 (25 psi) 75 (3") 0.029 (k=0.20) 2.65 (R-15) 24.8 (1.55 pcf) 172 (25 psi) 50 (2") 0.029 (k=0.20) 1.77 (R-10) 24.8 (1.55 pcf) 172 (25 psi) FOAMULAR 400 Insulation Thickness, mm Thermal Conductivity, W/mK, max. Thermal Resistance, m 2 K/W, min. Density, kg/m 3 , min. Compressive Strength, kPa, min. 100 (4") 0.029 (k=0.20) 3.53 (R-20) 28.9 (1.8 pcf) 276 (40 psi) 75 (3") 0.029 (k=0.20) 2.65 (R-15) 28.9 (1.8 pcf) 276 (40 psi) 50 (2") 0.029 (k=0.20) 1.77 (R-10) 28.9 (1.8 pcf) 276 (40 psi) FOAMULAR 600 Insulation Thickness, mm Thermal Conductivity, W/mK, max. Thermal Resistance, m 2 K/W, min. Density, kg/m 3 , min. Compressive Strength, kPa, min. 100 (4") 0.029 (k=0.20) 3.53 (R-20) 35.3 (2.2 pcf) 414 (60 psi) 75 (3") 0.029 (k=0.20) 2.65 (R-15) 35.3 (2.2 pcf) 414 (60 psi) 50 (2") 0.029 (k=0.20) 1.77 (R-10) 35.3 (2.2 pcf) 414 (60 psi) FOAMULAR 1000 Insulation Thickness, mm Thermal Conductivity, W/mK, max. Thermal Resistance, m 2 K/W, min. Density, kg/m 3 , min. Compressive Strength, kPa, min. 100 (4") 0.029 (k=0.20) 3.53 (R-20) 48.1 (3.0 pcf) 690 (100 psi) 75 (3") 0.029 (k=0.20) 2.65 (R-15) 48.1 (3.0 pcf) 690 (100 psi) 50 (2") 0.029 (k=0.20) 1.77 (R-10) 48.1 (3.0 pcf) 690 (100 psi) Notes: 1. SI, the International System of Units (Metric). I-P, inch-pound units (English). 2. Conversions are approximate, rounded to the nearest significant digit that is customary for a given property as shown in the tables. 3. I-P unit definitions: Thermal Conductivity, "k" = Btuin/ft. 2 hrF Thermal Resistance, "R" = hrft 2 F/Btu Compressive Strength, "psi" = pounds per square inch Density, "pcf" = pounds per cubic foot OWENS CORNING FOAM INSULATION, LLC ONE OWENS CORNING PARKWAY TOLEDO, OHIO 43659 1-800-GET-PINK www.owenscorning.com Pub. No. 10015703. Printed in U.S.A. September 2011. THE PINK PANTHER & 1964-2011 Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved. The color PINK is a registered trademark of Owens Corning. 2011 Owens Corning. Disclaimer of Liability Technical information contained herein is furnished without charge or obligation and is given and accepted at recipient's sole risk. Because conditions of use may vary and are beyond our control, Owens Corning makes no representation about, and is not responsible or liable for the accuracy or reliability of data associated with particular uses of any product described herein. Nothing contained in this bulletin shall be considered a recommendation.

Previous Page
Next Page