Division 7 Ebook Page 468 Fiberglass-Based Asphalt Shingles & Accessories, 07 31 00

Fiberglass-Based Asphalt Shingles & Accessories 4. Optional filter provides added protection against wind-driven rain and snow infiltration. 5. 4 ft (1.2 m) strip is available in 8 in (203 mm) and 10 in (254 mm) shingle-over widths that are 1 in (25 mm) high and overall product width is 11.43 in (290 mm) and 13.28 in (337 mm), respectively. 6. Suitable on roofs with a pitch from 3:12 to 16:12. 7. Standards/Qualifications: ICC-ESR 3007, Passes Wind-Driven Rain with 8-4/5 in (224 mm) of rain at 110 mph (177 km/h), Florida Product Approval (FL10758.1), Miami-Dade County Product Approval (09- 1019.03), and TDI listed for usage in Texas Coastal Regions (RV-47). D. VentSure Metal Slant Back Roof Vent 1. Rooftop mounted, slant-back designed, metal exhaust ventilator designed to evacuate hot and/or moisture- laden air from attics. 2. Each vent provides 51 sq in (32900 sq mm) NFVA. 3. Aluminum and galvanized steel available in Weathered Grey, Brown, Black, or Mill Finish. 4. 16 in (406 mm) by 20 in (508 mm) base, 8 in (203 mm) diameter opening. 5. Suitable on roofs with a pitch up to 12:12. 6. Standards/Qualifications: TDI listed for usage in Texas Coastal Region (RV-20) E. Plastic Slant Back Roof Vent 1. Rooftop mounted, slant-back design with full screen, high-impact resin exhaust ventilator designed to evacuate hot and/or moisture-laden air from attics. 2. Each vent provides 55 sq in (35500 sq mm) NFVA. 3. Available in Weathered Grey, Brown, Black, Cedar, or White finish. 4. 17 in (432 mm) by 18 in (457 mm) base, 9 in (229 mm) by 9 in (229 mm) opening. 5. Standards/Qualifications: TDI listed for usage in Texas Coastal Region (RV-20). F. VentSure Metal Square Top Roof Vent 1. Rooftop mounted, square-top designed, metal exhaust ventilator designed to evacuate hot and/or moisture- laden air from attics. 2. Each vent provides 51 sq in (32900 sq m) NFVA. 3. Aluminum and galvanized steel available in Weathered Grey, Brown, Black, or Mill finish. 4. 16-1/2 in (419 mm) by 17-1/2 in (445 mm) base, 8 in (203 mm) by 8 in (203 mm) opening.

Previous Page
Next Page