Division 7 Ebook Page 414 ELAMINATOR Insulation System, 07 21 16

OptiLiner Banded Liner System, Thermal, Metal Building 4. Double sided vapor barrier tape. Complies with the following: a. Width 0.75" b. Rubber based and free film 5. Patch tape. Complies with the following: a. Adhesive added to one side b. Installation temperature from 10F to 110F c. 3" width 6. Metal Banding/Straps. Complies with the following: a. Coated steel b. 1.0" wide c. Structural Steel Grade 50 per ASTM C 653 d. Exposed color to match vapor barrier 1) White 2) Black e. Backing - gray 7. Thermal breaks a. Closed cell polyethylene foam tape for wall applications. Complies with the following: 1) 0.125" thick to 0.375" thick 2) 3.0" wide b. Thermal spacer blocks. Complies with the following: 1) Extruded or expanded polystyrene 2) Minimum width 3.0" 3) Thickness 0.5" - 1.0" 8. Light gage steel fasteners a. Zinc plated cold forged steel b. Head color to match vapor barrier 1) White 2) Black c. Contain rubber sealing washer 9. Heavy gage steel fasteners a. Zinc plated cold forged steel b. Head color to match vapor barrier 1) White 2) Black c. Contain rubber sealing washer 10. Insulation Hangars a. Insul-hold insulation hangars PART 3 - EXECUTION 3.1.1.1 EXAMINATION A. Examine the areas and conditions under which work of this section will be installed. Verify that adjacent materials are dry and ready to receive insulation. Verify structure, bracing, and concealed building systems have been tested and inspected. B. Provide written report listing conditions detrimental to performance of work in this section. Do not proceed with installation until unsatisfactory conditions have been corrected. 3.1.1.2 INSTALLATION A. Install liner system in accordance with manufacturer's installation instructions and approved Shop Drawings. PRE-ENGINEERED BUILDING BLANKET INSULATION 07 21 16 - 4

Previous Page
Next Page