Division 7 Ebook Page 411 ELAMINATOR Insulation System, 07 21 16

OptiLiner Banded Liner System, Thermal, Metal Building PROJECT ENGINEER RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment. This guide is to aid in the creation of a complete building specification that is to be fully reviewed and edited by the engineer. Sections of this guide should be included, edited, or omitted based on the requirements of a specific project. It is the responsibility of both the specifier and the purchaser to determine if a product or system is suitable for its intended use. Neither Owens Corning, nor any of its subsidiary or affiliated companies, assume any responsibility for the content of this specification guide relative to actual projects and specifically disclaim any and all liability for any errors or omissions in design, detail, structural capability, attachment details, shop drawings or other construction related details, whether based upon the information provided by Owens Corning or otherwise. SECTION 07 21 16 PRE-ENGINEERED BUILDING BLANKET INSULATION PART 1 - GENERAL 1.1.1.1 SUMMARY A. Section Includes: Provide insulation system for pre-engineered metal buildings - new construction and existing construction. B. Related Sections: 1. Section 13 34 00 - Fabricated Engineered Structures. 2. Division 21 - Fire Suppression 3. Division 22 - Plumbing; Rough-in utilities. 4. Division 23 - HVAC; Rough-in utilities. 5. Division 26 - Electrical; Rough-in utilities. 1.1.1.2 REFERENCES A. Materials shall meet the property requirements of one or more of the following specifications as applicable to the specific product or end use: 1. American Society for Testing of Materials (ASTM): a. ASTM C991 - Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings. b. ASTM C1136 - Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation. c. ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials. d. ASTM E 96 - Standard Test Method for Water Vapor Transmission of Materials in Sheet Form (Procedure A). 2. North American Insulation Manufacturers Association (NAIMA): a. NAIMA 202-96(R) (Rev. 2000) STANDARD For Flexible Fiberglass Insulation to be Laminated for Use in Metal Buildings 3. National Fire Protection Association (NFPA): a. NFPA 255 - Standard Method of Test of Surface Burning Characteristics of Building Materials. 4. Underwriters Laboratories (UL): a. UL 723 - Test for Surface Burning Characteristics of Building Materials. PRE-ENGINEERED BUILDING BLANKET INSULATION 07 21 16 - 1

Previous Page
Next Page