Division 7 Ebook Page 402 Fiberglass, Exterior Wall, 07 21 16

EnergyComplete Thermal Insulation PROJECT ENGINEER RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment. This guide is to aid in the creation of a complete building specification that is to be fully reviewed and edited by the engineer. Sections of this guide should be included, edited, or omitted based on the requirements of a specific project. It is the responsibility of both the specifier and the purchaser to determine if a product or system is suitable for its intended use. Neither Owens Corning, nor any of its subsidiary or affiliated companies, assume any responsibility for the content of this specification guide relative to actual projects and specifically disclaim any and all liability for any errors or omissions in design, detail, structural capability, attachment details, shop drawings or other construction related details, whether based upon the information provided by Owens Corning or otherwise. Owens Corning's EnergyComplete with Flexible Seal Technology Whole Home Insulation and Air Sealing System is a system designed for use with residential construction. For more information, visit www.ocenergycomplete.com. For information on other Owens Corning residential products including insulation, roofing, masonry products and noise control solutions, visit www.owenscorning.com. SECTION 07 21 00 - THERMAL INSULATION PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: Insulation and air sealing system, including insulation, foam sealant and accessories. 1.2 SUBMITTALS A. Product Data: Submit data on product characteristics, performance criteria, and limitations, including the following: 1. General installation/application instruction. 2. Environmental conditions required for installation and installation techniques. 3. Safety requirements for application of products. B. Installer's/Applicator's Qualifications: Submit copy of Installer's/Applicator's certification from manufacturer. C. Sustainable Design: Provide manufacturer's certificates prepared by an independent, third party certifying to the following: 1. Recycled material content for products with recycled content. 2. Volatile organic compound content for each interior adhesive and sealant and related primer. D. Warranty: Submit manufacturer's standard one-year warranty against defects in material or manufacturing. 1.3 QUALITY ASSURANCE A. Installer's/Applicator's Qualifications: Company with a minimum of two years in performing work of this section and certified by manufacturer as an approved Installer/Applicator. B. Volatile Organic Compound (VOC) Emissions: Provide products complying with GREENGUARD Product Emission Standard for Children and Schools. C. Recycled Content: Fiberglass insulation shall contain minimum 50 percent recycled content. 1.4 DELIVERY, STORAGE, AND HANDLING A. Delivery: Deliver materials in manufacturer's original packaging. B. Storage: Store and protect products in accordance with manufacturer's instructions. Store with seals and labels intact and legible. Store inside and in a dry location. Protect insulation materials from moisture and soiling. Provide ventilation to prevent condensation and degradation of products. C. Inspection: Arrange storage of products to permit access for inspection. Periodically inspect to verify products are undamaged and are maintained in acceptable condition. PART 2 - PRODUCTS 2.1 MANUFACTURER A. Insulation and Air Sealing System: EnergyComplete with Flexible Seal Technology Whole Home Insulation and Air Sealing System by Owens Corning. 1

Previous Page
Next Page