Division 7 Ebook Page 319 OptiLinerí Banded Liner System Product Data Sheet

Product Data Sheet OptiLiner Banded Liner System Roof System Wall System Description The OptiLiner Banded Liner System is the latest metal building product offering from Owens Corning that is designed to maximize the thermal performance of Owens Corning EcoTouch Insulation for MBI Plus with PureFiber Technology light density fiberglass insulation in metal building roof and wall applications. The OptiLiner roof system uses a series of 1.0" galvanized steel straps to support a bright white or black polyethylene fabric that serves as the low permeance vapor retarder for the system. Fabric sections are custom fit for each bay in order to ensure a swift installation and a clean interior finished appearance. The installed banding and fabric support system allows roof cavities to be completely filled using two layers of Owens Corning EcoTouch Insulation for MBI Plus Metal Building. Completely filling the cavity results in minimal insulation compression and maximum system thermal performance. The amount of banding installed in the OptiLiner system can be minimized, however WORKERS MUST USE OSHA REQUIRED FALL PROTECTION WHEN INSTALLING THE BANDED LINER SYSTEM AT HEIGHTS. (SEE OSHA REGULATIONS AT 29 CFR 1926, SUBPART M). Banding reduction saves time and installation cost without sacrificing excellent in place thermal performance. The OptiLiner wall system uses the same basic components as the roof system. Additional materials included with the wall system are insulation hangers that are used to support unfaced insulation in the wall cavities and foam tape that is installed between the wall girts and the wall sheets in order to enhance system thermal performance. A minimum amount of 1.0" galvanized steel banding is installed after the fabric is in place to help support the insulation and to provide a consistent interior finish with the roof system. Using both the OptiLiner roof and wall system will provide excellent thermal, acoustic and appearance benefits for a metal building. PureFiber Technology Advantages Verified formaldehyde-free 1 and soft to the touch Certified by SCS Global Services to contain a minimum of 65% recycled glass content, 18% pre-consumer and 47% post-consumer Certified to meet indoor air quality standards under the GREENGUARD Certification Program and the GREENGUARD Gold Certification Program Thickness recovery provides outstanding thermal and acoustical performance Uses OptiLiner System is a high R-Value roof and wall insulation system that can be installed in metal buildings in order to maximize system thermal performance. Product Attributes Excellent Thermal Performance Minimal insulation compression in the OptiLiner roof and wall systems allows for excellent thermal performance. Installing the OptiLiner systems will help minimize the heating and cooling costs associated with conditioning a metal building. Further, the OptiLiner roof and wall system uses Owens Corning EcoTouch Insulation for Metal Building in every application. This will ensure thermal performance and minimize any potential performance variability based on the brand of insulation used in the system. 1 Applies to the insulation component only. WALLSHEET BANDING COLUMN INSULATION HANGER RAFTER ROOF FABRIC LINER BASE CHANNEL WALL FABRIC LINER GIRT UNFACED INSULATION TOP LAYER UNFACED INSULATION BANDING FABRIC LINER BOTTOM LAYER UNFACED INSULATION ROOF SHEET

Previous Page
Next Page