Division 7 Ebook Page 317 Certified R Metal Building Insulation Product Data Sheet

Description Owens Corning EcoTouch Certified R Metal Building Insulation is a light density fibrous glass blanket. EcoTouch Certified R is labeled with both a pre-laminated and post- laminated R value. Standard roll widths are 36", 48", 60" and 72". Made-to-Order widths are also available in 2" increments (i.e. even number). Applications Owens Corning EcoTouch Certified R Metal Building Insulation is used as part of the insulation system in the roofs and side walls of metal buildings. It is designed to be laminated with a variety of facings to provide attractive interior finishes, abuse resistance, and assistance in control of moisture. It can also be used when unfaced insulation is required in metal building roof and wall systems. Physical Properties Property Test Method Value Thermal Resistance ASTM C 177/C 518 Thickness Pre-lam. Post-lam. 3.4" R-10.8 R-10 3.7" R-11.9 R-11 4.3" R-14.1 R-13 5.3" R-17.3 R-16 6.3" R-20.6 R-19 8.0" R-27.1 R-25 9.25" R-32.5 R-30 Surface Burning ASTM E 84 / UL723 1 Flame spread index < 25 Smoke developed index < 50 Combustion Characteristics ASTM E 136 Non-combustible Water Vapor Sorption ASTM C 1104 / C 1104M 0.2% by volume Fungi Resistance ASTM C 1338 Passes Corrosiveness ASTM C 665, sec. 13.8 Passes Odor Emission ASTM C 1304 Passes Dimensional Tolerances ASTM C 167 Length, - 0" / + " Width, - " / + " 1. The surface burning characteristics of these products have been determined in accordance with UL 723. The standard should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating. Features Certified thermal performance Excellent recovery provides outstanding thermal and acoustical performance Contains an average of 65% recycled content GREENGUARD Gold Certified Easy to handle and laminate Standards, Codes Compliance ASTM C991-08, Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings; Type II. NAIMA 202-96 (Rev. 2000) Standard for Flexible Fiber Glass Insulation to be Laminated for Use in Metal Buildings. Technical Information Owens Corning EcoTouch Certified R Metal Building Insulation is manufactured in compliance with ASTM C991, Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings." This standard includes all performance and physical properties required of thermal insulation for use in metal building construction (see Physical Properties Table). Owens Corning EcoTouch Certified R Metal Building Insulation is regularly tested to ensure compliance to the NAIMA 202-96 (Rev. 2000) Standard. Sampling and testing is performed by the National Association of Home Builders Home Innovation Research Lab. The product is labeled on the top surface of each roll with the nominal R-value and the "NAIMA 202-96" (Rev. 2000) to indicate compliance. The NAIMA 202-96 (Rev. 2000) standard specifies thermal performance which provides the capability of obtaining nominal thermal resistance (R-values) after laminating. The actual thermal performance obtained from the laminated product will depend primarily on the recovered thickness. Note that these nominal R-values are for the insulation only and do not include the effects of facings, air films, compression of insulation at framing members, conductance through fasteners, or other heat transfer paths particular to an installation. The recovered thickness achieved will depend on a number of variables determined in the laminating process and hence are outside of Owens Corning's control. To address these issues, a number of leading metal building insulation laminators produce products which meet the National Insulation Association's "Certified Faced Insulation Standard" (NIA 404). Samples of faced products are periodically tested by a nationally recognized laboratory and determined to meet the NIA standard. PRODUCT DATA SHEET EcoTouch Certified R Metal Building Insulation

Previous Page
Next Page