Division 7 Ebook Page 252 THERMAPINK® XPS Insulation Product Data Sheet

Additional protection over the THERMAPINK Extruded Polystyrene (XPS) Rigid Foam Insulation such as added cover boards, reflective membrane surfaces or pavers may be required in roof areas adjacent to reflective walls, parapets, rooftop equipment areas, or other vertical surfaces that may reflect and intensify the sun's energy. This product is combustible. For additional information, consult MSDS or contact Owens Corning World Headquarters at 1-800-GET-PINK . Standards, Codes Compliance Meets ASTM C578 Type X (THERMAPINK 18 Insulation) or Type IV (THERMAPINK 25 Insulation) UL Classified. A copy of UL Classification Certificate U-197 is available at www.owenscorning.com See UL ER8811-01 at UL.com UL (Underwriters Laboratories) Roof Deck Constructions, tested in accordance with UL 1256, "Standard for Fire Test of Roof Deck Constructions" including Roof Deck Construction #457 FM (Factory Mutual) Class 1 Roof Decks ASTM E108 Fire Classified Assemblies ASTM E119 Fire Resistance Rated Roof/Ceiling Assemblies UL and FM Wind Uplift Rated Assemblies See www.foamular.com, UL On-Line Certifications Directory, and FM RoofNav for details on listings, constructions and assemblies Meets California Quality Standards and HUD UM #71a Compliance verification by RADCO (AA-650) Product and Packaging Data 1 FOAMULAR THERMAPINK Extruded Polystyrene (XPS) Rigid Foam Insulation Material Packaging Extruded polystyrene closed-cell foam panel with continuous skin on face and back surface. Shipped in poly-wrapped units with individually wrapped or banded bundles. Thickness (in) Product Dimensions Thickness (in) x Width (in) x Length (in) Pallet (Unit) Dimensions (typical) Width (ft) x Length (ft) x Height (ft) Square feet per Pallet Board feet per Pallet Bundles per Pallet Pieces per Bundle Pieces per Pallet Edges THERMAPINK 25 Insulation 2 Square 1 1 x 48 x 96 4 x 8 x 8 3,072 8 12 96 1 1.5 x 48 x 96 4 x 8 x 8 2,048 3,072 8 64 2 2 x 48 x 96 4 x 8 x 8 1,536 3,072 8 6 48 3 3 x 48 x 96 4 x 8 x 8 1,024 3,072 8 4 32 4 4 x 48 x 96 4 x 8 x 8 768 3,072 8 3 24 1. Product availability and lead times vary by region and by product. Consult your local Owens Corning sales representative for availability and lead times. 2. THERMAPINK 18 insulation is available in the same sizes but is made to order only. Flute Span Capability 1,4,5 Steel Deck Type 2 Thickness, minimum 3 Rib Opening, Width Rib Depth THERMAPINK 18 THERMAPINK 25 A (narrow rib) 1" 1" F (intermediate rib) 1" 1" 1" B (wide rib) 1" 1" 2 5 /8" 1" 3DR (deep rib) 2" 1" 2" 3" and greater Long Span 2" 1" 3 /8" 4 3 /8" 3" and greater Long Span 2" 6" 3" and greater Cellular Not Permitted 1 Not Permitted 1 Varies Acoustical Not Permitted 1 Not Permitted 1 Varies 1. See Underwriters Laboratories Roof Deck Construction #457 for full assembly details. Fire tested in accordance with ANSI/UL 1256, Fire Test of Roof Deck Constructions. 2. Minimum steel deck depth permitted is 1". Minimum 22 MSG. Cellular and acoustical decks were not tested, and are therefore not permitted. 3. THERMAPINK 400 and 600 insulations were not tested direct to deck and are not included in the UL #457 or building code listings for direct to deck application. 4. Data provided is derived from testing in general accordance with FM 4450 and FM 4470 resistance to foot traffic requirements. 5. FM Class 1 under deck fire ratings are not achieved by XPS direct to steel deck assemblies. Product Data Sheet FOAMULAR THERMAPINK Extruded Polystyrene (XPS) Rigid Foam Insulation

Previous Page
Next Page