Division 7 Ebook Page 205 EcoTouch® Sonobatts® Insulation Product Data Sheet

Product Data Sheet EcoTouch Sonobatts Insulation with PureFiber Technology Applicable Standards Unfaced Sonobatts insulation complies with ASTM C665, Type I and ASTM E136. Kraft-faced Sonobatts Insulation complies with ASTM C665, Type II, Class C. The thermal resistance values for Sonobatts insulation were tested in accordance with ASTM C518; R-value for insulation only. The surface burning characteristics of Sonobatts insulation were derived from products tested in accordance with ASTM E84. This standard is used solely to measure and describe properties of products in response to heat and flame under controlled laboratory conditions, and should not be used to describe or approve the fire hazard of materials under actual fire conditions. However, the results of these tests may be used as elements of a fire risk assessment that takes into account all of the factors pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest five rating. The vapor retarder permeance of the kraft facing on Sonobatts insulation was developed from tests conducted in accordance with ASTM E96, desiccant method.

Previous Page
Next Page