Division 7 Ebook Page 203 EcoTouch® Sonobatts® Insulation Product Data Sheet

Product Data Sheet EcoTouch Sonobatts Insulation with PureFiber Technology Description EcoTouch Sonobatts insulation is flexible, fiber glass insulation, made in R-values from 11 to 38. Sonobatts insulation is available plain, or faced with a kraft vapor retarder. The product is manufactured in thicknesses from 3" to 12". Uses Sonobatts insulation is designed for use over suspended ceiling panels to economically improve both the noise control and thermal performance of new or existing ceiling systems. The product is sized to fit over standard ceiling tiles. Features and Benefits Excellent Thermal Performance The excellent thermal resistance of Sonobatts insulation may help reduce both the size requirements and operating costs of HVAC equipment. An optional kraft vapor retarder facing is available where needed. Acoustically Effective Sonobatts insulation is not only a good thermal insulator, but it has excellent noise control properties as well. Sonobatts insulation can significantly improve the ceiling Sound Transmission Class (STC) rating by 4-10 points. When Sonobatts insulation is used in a return air plenum for acoustical benefit, the unfaced insulation has been tested according to UL 181 air erosion test and can be used for air velocities up to 1000 fpm. Easy Installation Installation of Sonobatts insulation is easy. It can be installed in suspended ceiling systems by simply laying the product on top of the ceiling panels. Easy installation makes Sonobatts insulation the ideal product for upgrading thermal values in renovation and remodeling projects. Design Considerations Caution: This facing will burn. Do not leave exposed. Facing must be installed in substantial contact with an approved ceiling, floor or wall material. Keep open flame and other heat sources away from facing. See packaging for warnings, fire hazard and installation instructions, or call 1-800-GET-PINK . Sonobatts insulation is designed for use with suspended ceiling systems to improve building energy efficiency. This application requires that the building envelop block the movement of air from the outdoor environment to the conditioned space. Neither the insulation nor its facing should be relied upon to provide an air barrier. Failure to provide an adequate air barrier could lead to loss of thermal control, discomfort of the building occupants and frozen pipes. Technical Data EcoTouch Sonobatts Insulation Width Length Thickness R-Value 1 24" (609mm) 48" (1,219mm) 12" (305mm) 38.0 24" (609mm) 48" (1,219mm) 9" (241mm) 30.0 24" (609mm) 48" (1,219mm) 6" (159mm) 19.0 24" (609mm) 48" (1,219mm) 3" (89mm) 11.0 1. Unfaced EcoTouch Sonobatts insulation complies with the property requirements of ASTM C665, Type I and ASTM E136. Kraft-faced EcoTouch Sonobatts insulation complies with the property requirements of ASTM C665, Type II, Class C. Surface Burning Characteristics/Building Code Construction Classification Products Flame Spread Smoke Developed ICBO BOCA SBCCI ICC Unfaced <10 All Types All Types All Types All Types Kraft Faced N/R III, IV, V III, IV, V III, V, VI III, IV, V EcoTouch Sonobatts insulation complies with ICBO (Uniform Building Code), BOCA (National Building Code), SBCCI (Standard Building Code) and ICC (International Building Code) model code requirements for building construction types listed above. Kraft facing on EcoTouch Sonobatts insulation will burn and must not be left exposed. The facing must be installed in substantial contact with an approved ceiling construction material. Protect facing from open flame or heat source.

Previous Page
Next Page