Division 7 Ebook Page 198 Senergy® Sentry Stucco CI Wall System Overview

Note BASF Wall Systems is an operating unit of BASF Corporation. (herein after referred to as "BASF Wall Systems") Residential Policy Apply wall systems in accordance with local building codes in force at the time of construction. On one and two-family residential framed construction, BASF Wall Systems requires that the wall system selected be one that includes provisions for moisture drainage. Please view the Senergy Residential Policy Bulletin on the Senergy website for a more detailed discussion of this topic. Disclaimer This information and all further technical advice are based on BASF Wall Systems' present knowledge and experience. However, BASF Wall Systems assumes no liability for providing such information and advice including the extent to which such information and advice may relate to existing third party intellectual property rights, especially patent rights. In particular, BASF Wall Systems disclaims any and all CONDITIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. BASF WALL SYSTEMS SHALL NOT BE RESPONSIBLE FOR CONSEQUENTIAL, INDIRECT OR INCIDENTAL DAMAGES (INCLUDING LOSS OF PROFITS) OF ANY KIND. BASF Wall Systems reserves the right to make any changes according to technological progress or further developments. It is the customer's responsibility and obligation to carefully inspect and test any incoming goods. Performance of the product(s) described herein should be verified by testing and carried out only by qualified experts. It is the sole responsibility of the customer to carry out and arrange for any such testing. Reference to trade names used by other companies is neither a recommendation, nor an endorsement of any product and does not imply that similar products could not be used. PRODUCT DATA-SIZES & PACKAGING SENERTHIK BASE LIQUID is packaged in 18.1 kg 10-liter (40 lb, 5-gallon) pails. Mixed with one 42.6 kg (94 lb) bag of Portland cement, 68 - 98.7 kg (150 - 200 lbs) silica sand, and one package 0.45 kg (1 lb) of FIBERFILL, SENERTHIK BASE LIQUID yields approximately 7 m (75 ft) of coverage at 10 mm (3/8") thickness. FIBERLATH MESH is packaged in 965 mm x 45.7 m (38" x 150') rolls. SENERSHIELD-R, spray-, roller-, brush- or trowel-applied liquid air/water- resistive barrier, is packaged in 27.2-kg,19-liter (60-pound, 5-gallon) pails. Approximate coverage rate per pail at 10 mils (wet) thickness varies depending upon substrate: DensGlass exterior sheathing [27.9-30.6 m 2 (300-330 ft 2 ) (1 coat)], cement-board [27.9-37.2 m 2 (300-400 ft 2 ) (1 coat)], exterior gypsum [46.1-53.3 m 2 (500-600 ft 2 ) (1 coat)], OSB [23-32.2 m 2 (250-350 ft 2 ) (2 coats)], plywood [23-32.2 m 2 (250-350 ft 2 ) (2 coats)]. 4" SHEATHING FABRIC for use with SENERSHIELD-R is packaged in 10.2 cm x 54.8 m (4" x 180') rolls. 9" SHEATHING FABRIC for use with SENERSHIELD-R is packaged in 22.9 cm x 54.8 m (9" x 180') rolls. SENERWRAP 4 is available in 10.2 cm x 30.5 m (4" x 100') rolls, and SENERWRAP 9 is available in 22.9 cm x 30.5 m (9" x 100') rolls. FLASHING PRIMER is packaged in 19-liter (5-gallon) pails and 3.8-liter (1-gallon) bottles. Coverage varies depending upon substrate. Approximate coverage rate for ALPHA BASE COAT to embed FLEXGUARD 4 MESH is 15 m 2 (160 ft 2 ) per 27.2-kg, 19-liter (60-pound, 5-gallon) pail. FLEXGUARD 4 standard-weight Reinforcing Mesh at approximately 4.5 oz/yd 2 is available in 96.5 cm x 45.7 m (38" x 150') rolls. For wall system areas not expected to receive abnormal traffic or abuse. Approximate coverage rate for ALPHA DRY BASE COAT to embed FLEXGUARD 4 is 11.1 m (120 ft) per 22.6-kg (50-pound) bag. Approximate coverage rate for Senergy TINTED PRIMER is 69.6-116.1 m (750-1,250 ft) per 24.9-kg, 19-liter (55-pound, 5-gallon) pail. SENERFLEX and SILCOAT Finishes are packaged in 31.7-kg, 19-liter (70-pound,5-gallon) pails.Approximate coverages per pail for various textures are: BELGIAN LACE [14.8 m 2 (160 ft 2 )], CLASSIC [13 m 2 (140 ft 2 )], COARSE [8.3 m 2 (90 ft 2 )], FINE [13 m 2 (140 ft 2 )], SAHARA [11.1 m 2 (120 ft 2 )], TEXTURE (coverage varies depending upon application). Specialty Finishes are packed in 19-liter (5-gallon) pails.Approximate coverages per pail for various textures are:TC-100 [6.5-9.2 m 2 (70- 100 ft 2 )],AURORA STONE [6.5 m 2 (70 ft 2 )], BOREALIS [6.5-9.2 m 2 (70-100 ft 2 )],ALUMINA [8.4-9.2 m 2 (90-100 ft 2 )]. ANTICOGLAZE is packaged in 18.14 kg, 19-liter (40-pound, 5-gallon) pails and in 7.25 kg, 7.6 liter (16-pound, 2-gallon) pails. Coverage varies according to application technique. For estimation guidelines, consider using a coverage rate of 2500 ft 2 per 5-gallon pail or 1000 per 2-gallon pail. SENERGY SENTRY STUCCO CI WALL SYSTEM OVERVIEW BASF Wall Systems 3550 St. Johns Bluff Road South Jacksonville, FL 32224-2614 P: 800.221.9255 F: 904. 996.6300 www.senergy.basf.com 2010 BASF Corporation Printed in U.S.A. 10/10

Previous Page
Next Page