Division 22 23 Ebook Page 64 Pipe & Mechanical Insulation Brochure

34 DESCRIPTION Noncombustible insulation made from Inorganic FIBERGLAS bonded with a thermosetting resin. Type I-HP is manufactured in roll form, while Type II-HP comes in batt form. APPLICATION/USE It is available in a variety of density and thickness combinations, making this incredibly versatile and well- suited for a variety of commercial and industrial uses with operating temperatures up to 1,000F. Panel systems Industrial ovens Flexible wrap for irregular surfaces Metal mesh blankets (Type II-HP only) FIBERGLAS TIW Insulation FIBERGLAS TIW Insulation is available in a batt or roll. It offers a high operating temperature and the lightweight, low-density construction makes it easy to cover large areas to lower equipment operating costs. FEATURES & BENEFITS Easy to handle and install No tendency for pin-hole elongation under vibration situations Large batts/blankets cover areas quickly with no need to drill for studs Type II-HP has a higher density and is better suited for applications where more compressive resistance is needed Physical property data Property Type I-HP Value Type II-HP Value Test Method Equipment Operating Temperature Range 1 Up to 1,000F (538C) ASTM C411 Nominal Density 1.0 pcf (16 kg/m 3 ) 2.5 pcf (40 kg/m 3 ) ASTM C167 Shot Content Negligible ASTM C1335 Water Vapor Sorption < 2.0% by weight at 120F (49C), 95% R.H. ASTM C1104 Surface Burning Characteristics 2 Flame Spread: 25 Smoke Developed:50 UL 723, ASTM E84 or CAN/ULC-S102 1. Maximum allowable thickness at 1,000F (538C): Type I-HP - 8.5" (216mm); Type II-HP - 6" (152mm). 2. The surface burning characteristics of these products have been determined in accordance with UL 723, ASTM E84 or CAN/ULC-S102. This standard should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating. SPECIFICATIONS FIBERGLAS TIW Insulation Boilers Precipitators

Previous Page
Next Page