Division 22 23 Ebook Page 231 Section 23 07 13 Duct Insulation-QuietR® Textile/Rotary Duct Liner & Duct Liner Board

DUCT INSULATION 23 07 13 - 2 Duct Insulation - QuietR Textile/Rotary Duct Liner & Duct Liner Board 1. For adhesives and sealants, submit documentation including printed statement of VOC content. B. Sustainable Design Submittals: Submit manufacturers sustainable desifn certifications as specified. 1.4 DELIVERY AND STORAGE OF MATERIALS A. Delivery: Deliver materials in manufacturers original packaging. B. Storage: Store and protect products in accordance with manufacturers instructions. Store in a dry indoors location. Protect insulation materials from moisture and soiling. C. Do not install insulation that has been damaged or wet. Remove it from jobsite. PART 2 - PRODUCTS 2.1 MANUFACTURER A. Owens Corning Insulating Systems, LLC, Toledo, OH 43659; www.owenscorning.com. 2.2 DUCT INSULATION A. General: 1. Duct Liners: Rigid, resin bonded fibrous glass blankets or board with a damage-resistant, flame retardant veil faced airstream surface. 2. Owens Corning QuietR Duct Liner insulation is not known to contain penta-, octa, or deca- brominated diphenyl flame retardant substances, such as deca-Bromine (deca-BDE). B. Certifications: 1. QuietR Rotary and Textile Duct Liners are GREENGUARD Indoor Air Quality Certified . 2. QuietR Rotary and Textile Duct Liners have achieved GREENGUARD Gold Certification for dimensions up to and including 1 thickness. 3. QuietR Rotary and Textile Duct Liners are certified by SCS Global Services to contain a minimum of 53% recycled glass content, 31% pre-consumer and 22% post-consumer. 4. All duct liner and duct liner board products are UL listed and labeled. C. Duct Insulation, Rotary Type: For service at internal air velocities not to exceed 6,000 fpm (30.5 m/s), provide the following: 1. Acceptable Product: Owens Corning TM QuietR Rotary Duct Liner. a. Type R-2.2: 1/2 in (13mm) thick. b. Type R-4.2: 1 in (25mm) thick. c. Type R-6.3: 1-1/2 in (38mm) thick. d. Type R-8: 2 in (51mm) thick. D. Duct Insulation, Textile Type: For service at internal air velocities not to exceed 6,000 fpm (30.5 m/s), provide the following: 1. Acceptable Product: Owens Corning QuietR Textile Duct Liner. a. Type 150: 1 in, 1-1/2 in, or 2 in (25mm, 38mm or 51mm) thick. b. Type 200: 1/2 in, 1 in, 1-1/2 in, or 2 in (13mm, 25mm, 38mm or 51mm) thick. c. Type 300: 1/2 in or 1 in (13mm or 25mm) thick.

Previous Page
Next Page