Division 22 23 Ebook Page 128 Fiberglas’ FLEXWRAP® Pipe and Tank Wrap Product Data Sheet

Product Data Sheet Fiberglas FLEXWRAP ASJ impalement pins for securement purposes are permitted but should be sealed as necessary with mastic. Standards, Codes Compliance ASTM C1393 "Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks"; Types I, II IIIA, IIIB; Category 2 Doesn't contain the fire retardant decabrominated diphenyl ether (decaBDE) Environmental and Sustainability Owens Corning is a worldwide leader in building material systems, insulation and composite solutions, delivering a broad range of high- quality products and services. Owens Corning is committed to driving sustainability by delivering solutions, transforming markets and enhancing lives. More information can be found at http:// sustainability.owenscorning.com. OWENS CORNING INSULATING SYSTEMS, LLC ONE OWENS CORNING PARKWAY TOLEDO, OHIO 43659 1-800-GET-PINK www.owenscorning.com Pub. No. 10018355-A. Printed in U.S.A. July 2013. THE PINK PANTHER & 1964-2013 Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved. The color PINK is a registered trademark of Owens Corning. 2013 Owens Corning. All Rights Reserved. Disclaimer of Liability Technical information contained herein is furnished without charge or obligation and is given and accepted at recipient's sole risk. Because conditions of use may vary and are beyond our control, Owens Corning makes no representation about, and is not responsible or liable for the accuracy or reliability of data associated with particular uses of any product described herein. Nothing contained in this bulletin shall be considered a recommendation. Thermal Conductivity k vs Temperature Mean Temperature, F 0.6 0.5 0.4 0.3 0.2 0.1 0 k, Btuin/(hrft 2 F) 0 100 200 300 400 500 Mean Temp. F k Btuin/ hrft 2 F Mean Temp. C W/m C 75 0.24 25 0.035 100 0.25 50 0.038 200 0.32 100 0.047 300 0.40 150 0.057 400 0.48 200 0.069 500 0.58 250 0.081 Stretch-Out Requirements The following table may be used to estimate stretch-out lengths for various standard pipe sizes. NPS Pipe OD in. FLEXWRAP Pipe and Tank Wrap Thickness 1.5" (38mm) 2" (51mm) 2.5" (64mm) 3" (76mm) in. mm in. mm in. mm in. mm 6 6.6 8 8.6 36.5 928 10 10.8 43.5 1,104 46.6 1,184 12 12.8 49.7 1,263 52.9 1,343 56.0 1,423 14 14 53.5 1,359 56.6 1,439 59.8 1,519 16 16 59.8 1,519 62.9 1,598 66.1 1,678 69.2 1,758 18 18 66.1 1,678 69.2 1,758 72.4 1,838 75.5 1,917 20 20 72.3 1,838 75.5 1,917 78.6 1,997 81.8 2,077 22 22 78.6 1,997 81.8 2,077 84.9 2,157 88.0 2,236 24 24 84.9 2,157 88.1 2,236 91.2 2,316 94.3 2,396 26 26 91.2 2,316 94.3 2,396 97.5 2,476 100.6 2,555 28 28 97.5 2,476 100.6 2,555 103.7 2,635 106.9 2,715 30 30 103.7 2,635 106.9 2,715 110.0 2,795 113.2 2,874 32 32 110.0 2,795 113.2 2,874 116.3 2,954 119.5 3,034 34 34 116.3 2,954 119.4 3,034 122.6 3,114 125.7 3,193 36 36 122.6 3,114 125.7 3,193 128.9 3,273 132.0 3,353 Note: Lengths provided in table do not include a staple flap. Add 3-4 inches of length if a staple flap is desired.

Previous Page
Next Page