Division 22 23 Ebook Page 122 VaporWick Installation Instructions

Installation Instructions VaporWick Pipe Insulation C. Cover the evaporating holes with two overlapping strips of VaporWick Sealing Tape extending at least one half inch past each side of the hanger saddle. D. Some specifications may call for a short section of a ridged or dense insulation at hanger locations. Although not ideal, most materials may be used in this way provided that the pipe is wrapped with VaporWick Wicking Material and the section length is minimized. Porous insulations such as calcium silicate must not be used. Cutting of Product A. Always cut VaporWick Pipe Insulation with a sharp knife or scissors. B. When cutting VaporWick Pipe Insulation to length, place wick on outside of insulation for ease and accuracy of cut. Accessories A. VaporWick Wick Material - 3" or 12" widths, color in black B. VaporWick Sealing Tape - 3" width, color in white C. VaporWick Evaporation Skirt Kit (Hula Skirt) Disclaimer of Liability Technical information contained herein is furnished without charge or obligation and is given and accepted at recipient's sole risk. Because conditions of use may vary and are beyond our control, Owens Corning makes no representation about, and is not responsible or liable for the accuracy or reliability of data associated with particular uses of any product described herein. Nothing contained in this bulletin shall be considered a recommendation. OWENS CORNING INSULATING SYSTEMS, LLC ONE OWENS CORNING PARKWAY TOLEDO, OHIO 43659 1-800-GET-PINK www.owenscorningcommercial.com Pub. No. 102462-E. Printed in U.S.A. November 2013. THE PINK PANTHER & 1964-2013 Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved. The color PINK is a registered trademark of Owens Corning. 2013 Owens Corning. All Rights Reserved.

Previous Page
Next Page