Division 22 23 Ebook Page 111 Fiberglas Insul-Quick Insulation Product Data Sheet

Environmental and Sustainability Owens Corning is a worldwide leader in building material systems, insulation and composite solutions, delivering a broad range of high-quality products and services. Owens Corning is committed to driving sustainability by delivering solutions, transforming markets and enhancing lives. More information can be found at www.owenscorning.com. Disclaimer of Liability Technical information contained herein is furnished without charge or obligation and is given and accepted at recipient's sole risk. Because conditions of use may vary and are beyond our control, Owens Corning makes no representation about, and is not responsible or liable for the accuracy or reliability of data associated with particular uses of any product described herein. SCS Global Services provides independent verification of recycled content in building materials and verifies recycled content claims made by manufacturers. For more information, visit www.SCSglobalservices.com. LEED is a registered trademark of the U.S. Green Building Council. Certifications and Sustainable Features Certified by SCS Global Services to contain a minimum of 53% recycled glass content, 31% pre-consumer and 22% post-consumer Pub. No. 14776-P. Printed in U.S.A. January 2017. THE PINK PANTHER & 1964-2017 Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved. The color PINK is a registered trademark of Owens Corning. 2017 Owens Corning. All Rights Reserved. OWENS CORNING INSULATING SYSTEMS, LLC ONE OWENS CORNING PARKWAY TOLEDO, OHIO, USA 43659 1-800-GET-PINK www.owenscorning.com PANEL CONSTRUCTION METAL WIRE MESH OR EXPANDED METAL LATH FLUSH APPLICATION - METAL LAGGING RIBBED METAL LAGGING FLUSH APPLICATION - CANVASSED, PAINTED CENTENT 8 OZ. CANVAS AND PAINT Thermal Performance, ASTM C680 Thickness, in. (mm) Operating Temperature, F ( C) 450 (232) 550 (288) 650 (343) 750 (399) 850 (454) HL ST HL ST HL ST HL ST HL ST 1 (25) 106 179 154 213 213 251 285 294 372 341 2 (51) 58 141 84 162 117 187 156 214 203 245 3 (76) 40 125 58 141 80 159 107 180 140 203 4 (102) 31 116 44 129 61 144 82 160 107 179 5 (127) 25 110 36 121 50 134 66 148 86 164 6 (152) 21 106 30 116 42 126 56 139 72 153 7 (178) 18 103 26 112 36 121 48 132 8 (203) 16 101 23 108 32 117 42 127 The above table provides approximate heat loss values (HL), Btu/hrft 2 , and Surface Temperatures (ST), F, for flat surfaces. Values are based on horizontal heat flow, vertical flat surface, 80 F ambient temperature, still air, weathered aluminum jacket. To convert heat loss values to W/m 2 , multiply values by 3.15. To convert surface temperatures, use the formula: C=(F-32) 1.8. Thermal Conductivity Mean Temp. F k Btuin/ hrft 2 F Mean Temp. C W/m C 75 0.23 25 0.033 100 0.24 50 0.037 200 0.30 100 0.045 300 0.37 150 0.054 400 0.46 200 0.066 500 0.58 250 0.081 Values are nominal, subject to normal testing and manufacturing tolerances.

Previous Page
Next Page