Division 22 23 Ebook Page 100 Air Handling Insulation Solutions Product Catalog

7 QuietR Rotary Duct Liner Owens Corning QuietR Rotary Duct Liner absorbs noise within sheet metal ducts, and contributes to indoor comfort by lowering heat loss or gain through duct walls. Key Features Absorbs fan and air turbulence noise and reduces popping noises within sheet metal ducts Outstanding thermal and acoustical performance Bacterial and fungal growth resistant with an EPA registered biocide that helps protect the airstream surface from microbial growth Standards, Codes Compliance ASTM C1071, Type I, Flexible (replaces obsolete Federal Specification HH-1-545B.) Meets NFPA 90A/90B ICC Compliant California Title 24 SMACNA Application Standard for Duct Liners NAIMA Fibrous Glass Duct Liner Installation Standard Conforms to ASHRAE 62-2001 Availability Thickness Roll Length R-Value in mm ft m (hrft2F)/Btu (m2C)/W 13 100 31 2.2 0.38 1 25 100, 150* 31, 45* 4.2 0.74 1 38 50, 100 15, 31 6.3 1.11 2 51 50 15 8.0 1.41 *150 (45m) roll is available in select sizes 56" and wider. Ask your area sales manager for more details. Physical Properties Property Test Method Value Operating Temperature ASTM C411 250F (121C) Maximum Air Velocity UL 181 Erosion Test ASTM C1071 6,000 fpm (30.5 m/s) Water Vapor Sorption ASTM C1104 <3% by weight at 120F (49C), 95% R.H. Fungi Resistance ASTM C1338 Meets requirements Fungi Resistance ASTM G21 Meets requirements Bacteria Resistance ASTM G22 Meets requirements Corrosiveness 1 ASTM C665 (Corrosiveness Test) Will not cause corrosion greater than caused by sterile cotton on aluminum or steel Thermal Conductivity k at 75F ( at 24C mean) R-2.2 R-4.2 R-6.3 R-8 ASTM C518 Btuin/hrft2F 0.23 0.24 W/mC 0.034 0.035 Surface Burning Characteristics 2 Flame Spread Smoke Developed ASTM E84, UL 723, CAN/ULC S102 25 50 1. When wet, coated surfaces of QuietR Rotary Duct Liner in contact with galvanized steel may cause discoloration of the sheet metal. 2. The surface burning characteristics of these products have been determined in accordance with UL 723 or CAN/ULC-S102. This standard should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating. UL 723 and ASTM E84 are the same test methods.

Previous Page
Next Page